So got a 3D resin printer. Amazing detail.

[Chock Full o Nuts]

Have had an FDM for quite a while, and had thought about dipping my toe into resin.

Damn you Amazon and your advert 'article' for having a model at damn near 50% off list!

But then came the other needs to do it. Not bad though.

The level of detail is amazing taking liquid resin to a solid with UV light, layer by miniscule layer.

A test print that came preloaded to check quality. Piece about 3" wide 2" tall.

 

[Jessie C]

Have had an FDM for quite a while, and had thought about dipping my toe into resin.

Damn you Amazon and your advert 'article' for having a model at damn near 50% off list!

But then came the other needs to do it. Not bad though.

The level of detail is amazing taking liquid resin to a solid with UV light, layer by miniscule layer.

A test print that came preloaded to check quality. Piece about 3" wide 2" tall.
View attachment 67573314

Very cool! How much does something like this cost? I've worked in the past with resin, and it's always been translucent, guess it requires a few more ingredients....is this a tea light holder?

 

[NWRatCon]

My son and I have been looking at 3D printers as a way of using his design degree (and make money). They aren't cheap, but can be had for surprisingly less than even a year ago. The quality at even the bottom end has become amazing.

 

[Chock Full o Nuts]

Very cool! How much does something like this cost?

Depends on what you want to sink into it. One I got had shown listed at 300 some places but can be had for less. 160 a good deal though.

https://www.amazon.com/ANYCUBIC-Mono-Printer-LighTurbo-Printing/dp/B0DB887MCD

I've worked in the past with resin, and it's always been translucent, guess it requires a few more ingredients....

All kinds of resin colors to choose from, including translucent. Finishing this morning printing the second part of a little Statue of Liberty in translucent blue. Do need a wash and cure station to clean it up and fully harden the model. 100 bucks for one big enough to accommodate the size my printer can do.

https://www.amazon.com/ANYCUBIC-Wash-Cure-Uparaded-Gooseneck/dp/B083GTS8XJ/ref=pd_bxgy_d_sccl_1/147-9458027-5368451?pd_rd_w=cweim&content-id=amzn1.sym.d6ac0d01-6230-4dde-a4f9-41c646a6c7b8&pf_rd_p=d6ac0d01-6230-4dde-a4f9-41c646a6c7b8&pf_rd_r=C7HP5RJC0Z1QNP1KKRVF&pd_rd_wg=PcorJ&pd_rd_r=fd092850-14c0-4599-ad6a-ff8303a55114&pd_rd_i=B083GTS8XJ&th=1

is this a tea light holder?

Believe it's just meant to be a test piece to see if the unit is calibrated correctly. Wouldn't put a flame near it.
There are precautions you should take when printing with resin. Gloves and such to not come in contact until fully cured, ventilation...

 

[Chock Full o Nuts]

My son and I have been looking at 3D printers as a way of using his design degree (and make money). They aren't cheap, but can be had for surprisingly less than even a year ago. The quality at even the bottom end has become amazing.

I recently upgraded to a Creality K1C from a Monoprice I had for a time.

Creality K1C High Speed 3D Printer

Creality K1C High Speed 3D printer for sale. Creality K1 C 3D printer comes with all-metal extruder kit, ai camera, and 600mm/s printing speed. Creality official 3d printer online store on sale. Free shipping from the local warehouse. Buy the K1C 3D printer now.

www.creality3dofficial.com

Then went and got the multicolor upgrade add-on kit and CFS unit to automate color changes.

Creality CFS: 16-Color Filament System with Auto Switch & Relay

Level up creativity with CFS, supporting 16 colors, snap-away support, advanced sensors, and moisture-proof storage. Includes filament buffer, tubes, ca...

store.creality.com

Now I kinda wish I bit the bullet and bought the bigger model with larger print volume. But oh well, can still do about 9"x9"x9".

I recently designed a birdhouse in 3d software that I could probably make a few bucks on. Has a shingle looking roof, chimney, and translucent windows. Looks like a real house! Will post a pic here after a bit.

 

[NWRatCon]

Depends on what you want to sink into it. One I got had shown listed at 300 some places but can be had for less. 160 a good deal though.

https://www.amazon.com/ANYCUBIC-Mono-Printer-LighTurbo-Printing/dp/B0DB887MCD

All kinds of resin colors to choose from, including translucent. Finishing this morning printing the second part of a little Statue of Liberty in translucent blue. Do need a wash and cure station to clean it up and fully harden the model. 100 bucks for one big enough to accommodate the size my printer can do.

https://www.amazon.com/ANYCUBIC-Wash-Cure-Uparaded-Gooseneck/dp/B083GTS8XJ/ref=pd_bxgy_d_sccl_1/147-9458027-5368451?pd_rd_w=cweim&content-id=amzn1.sym.d6ac0d01-6230-4dde-a4f9-41c646a6c7b8&pf_rd_p=d6ac0d01-6230-4dde-a4f9-41c646a6c7b8&pf_rd_r=C7HP5RJC0Z1QNP1KKRVF&pd_rd_wg=PcorJ&pd_rd_r=fd092850-14c0-4599-ad6a-ff8303a55114&pd_rd_i=B083GTS8XJ&th=1

Believe it's just meant to be a test piece to see if the unit is calibrated correctly. Wouldn't put a flame near it.
There are precautions you should take when printing with resin. Gloves and such to not come in contact until fully cured, ventilation...

Ventilation is the biggest thing - and can be more expensive than the printer.

 

[NWRatCon]

I recently upgraded to a Creality K1C from a Monoprice I had for a time.

Now I kinda wish I bit the bullet and bought the bigger model with larger print volume. But oh well, can still do about 9"x9"x9".

I recently designed a birdhouse in 3d software that I could probably make a few bucks on. Has a shingle looking roof, chimney, and translucent windows. Looks like a real house! Will post a pic here after a bit.

I'd be very interested in seeing that. Multicolor is a must, the size we're still discussing. The other thing is the waste from multicolor printing as a concern. What's your experience with that?

 

[Chock Full o Nuts]

Ventilation is the biggest thing - and can be more expensive than the printer.

Have been reading up a bit on it, and yes, some have full enclosures with ducting and filters. Really, as long as you're not hanging out for long periods in a confined space with it and no air turnover, not terribly risky.

I'm set up in a good sized room I don't hang out in near a window with a fan. Am preparing to install a high CFM exhaust fan right by the units vented to outside though.

 

[Chock Full o Nuts]

I'd be very interested in seeing that. Multicolor is a must, the size we're still discussing. The other thing is the waste from multicolor printing as a concern. What's your experience with that?

Its not really that bad if you are just changing colors at different layers. It flushes probably 3 inches of filament between getting the last bit of previous out and getting next color extruding. Now if you are doing multiple colors within same layers, you are purging a decent amount, plus adding a fair amount of time to the print by the time it does the changes.

As far as size, things can always be designed in parts and assembled. Glue, good temp controlled soldering iron, and a 3d printing pen are things to have. Recently got one of these. Good for fixing imperfections, 'welding' together, or just fun to play with and make whatever freehand!

PRO 3D Pen & Filaments

Our most advanced, professional-grade 3D printing pen for creative professionals. Engineered for architects, artists, designers and engineers to test concepts, prototype and quickly illustrate in 3D. Here is our collection of pen and plastics.

the3doodler.com

 

[NWRatCon]

Its not really that bad if you are just changing colors at different layers. It flushes probably 3 inches of filament between getting the last bit of previous out and getting next color extruding. Now if you are doing multiple colors within same layers, you are purging a decent amount, plus adding a fair amount of time to the print by the time it does the changes.

As far as size, things can always be designed in parts and assembled. Glue, good temp controlled soldering iron, and a 3d printing pen are things to have. Recently got one of these. Good for fixing imperfections, 'welding' together, or just fun to play with and make whatever freehand!

PRO 3D Pen & Filaments

Our most advanced, professional-grade 3D printing pen for creative professionals. Engineered for architects, artists, designers and engineers to test concepts, prototype and quickly illustrate in 3D. Here is our collection of pen and plastics.

the3doodler.com

I didn't know about the pen! Great tip.

 

[Chock Full o Nuts]

I'd be very interested in seeing that.

Here it is. Need to do some tweaking on design to make the roof easily removable for cleaning but secure in place when up.
Roof dovetails in place but not real secure, so tacked it in place with the pen at the moment.
Chimney is actually open to let air flow, but capped well enough to keep rain out.

 

[Chock Full o Nuts]

And a roof peice in other colors. With the shingle slope in the design and a color change at the right layer gives this result.
Turned out pretty well.

 

[Chock Full o Nuts]

Resin printed 4" tall. Now to print the base.