Paint it black: Efficacy of increased wind turbine rotor blade visibility to reduce avian fatalities
As wind energy deployment increases and larger wind‐power plants are considered, bird fatalities through collision with moving turbine rotor blades are expected to increase. However, few (cost‐) effective deterrent or mitigation measures have so far been developed to reduce the risk of collision. Provision of “passive” visual cues may enhance the visibility of the rotor blades enabling birds to take evasive action in due time.
<snip>
The annual fatality rate was significantly reduced at the turbines with a painted blade by over 70%, relative to the neighboring control (i.e., unpainted) turbines. The treatment had the largest effect on reduction of raptor fatalities; no white‐tailed eagle carcasses were recorded after painting. Applying contrast painting to the rotor blades significantly reduced the collision risk for a range of birds.
<snip>
Ran across this little tidbit. A simple source solution that will go a long way to reduce avian death.
Error - Cookies Turned Off
Will painting lessen cancer cases?
So, add more toxic material to the machine. Great idea. :lamoRan across this little tidbit. A simple source solution that will go a long way to reduce avian death.
Error - Cookies Turned Off
Ran across this little tidbit. A simple source solution that will go a long way to reduce avian death.
Error - Cookies Turned Off
That actually makes sense. Here's the problem though, there is a reason fiberglass parts tend to be painted white. The reason is epoxy resin transition temperature which tends to be relatively low with most epoxy or polyvinylester resin systems that are not autoclave cured. Most wind turbine blades are NOT autoclave cured. Black painted turbine blades will lose strength sooner at lower temps than white painted blades.
which no doubt is another reasons they suggest painting/coloring at source of manufacture. I'm sure they can overcome any material issues.
Ran across this little tidbit. A simple source solution that will go a long way to reduce avian death.
Error - Cookies Turned Off
Sometimes less is more. I wonder if painting it black will have any side effects such as increased heat signatures and/or reduction in overall life due to increased heat.
I think this warrants further exploration. Perhaps some combo of colors and patterns may improve the situation.
I'm aware of a problem at a hydro electric solar plant in SoCal.
The plant works by focusing thousands of mirrors to reflect the sunlight onto a water-filled tower. The water boils and the resulting steam turns turbines to create electricity.
The problem is that when birds fly too close to the tower, the combined light beams (unseen by the birds) instantly fry the birds in mid flight (like a magnifying glass x 1000). They are called "streamers" by the plant workers as they watch the smoking bird corpses fall out of the sky.
The moving parts that wear out are in the hub. Don’t expect any lifespan issues.
Don’t know what you mean by heat signatures.
Black absorbs heat .. I was curious if the benefit of less wildlife deaths will have some unintended consequences because of the increased heat the blades will absorb.
Yes, I'm aware of the concept.
But the blades themselves are not parts that will wear out just because they're a little warmer. Do you think black cars melt or something?
The moving parts that wear out are in the hub, not the blades.
It sounds to me that you're primed to be against wind power and are grasping at anything you think could detract from it.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?