- Joined
- Jun 20, 2018
- Messages
- 49,377
- Reaction score
- 29,133
- Location
- Somewhere in the Low Country
- Gender
- Female
- Political Leaning
- Slightly Liberal
So, this whole quarantine thing has me a little on edge at home, bored to damn death is more like it...but there are numerous projects...I finished my yard, garden, so forth...and sat at the computer and looked at the crack in my plaster...and then bam cracked paint...so I go get the scraper...and here we are a few hours later...so ....how do I get it to the bare wood? Would you strip it to the raw wood and then sand and stain or should I just paint it again? I added the exterior so that you can get an idea of the style of the home. My home was built in 1890
The plaster is cracking because it is old as hell so yes, I made a hole in the wall around the crack in order to fix it....I don't want to replace with sheetrock, because it has a historical designation...so I have to do it the hard way and repair it with plaster again....then the color for my mantle.....(the mantle I did some time back...so no, I didn't strip it down in a few hours..just the one wall of the wainscoting. Any advise?? My husband is in Charleston for the rest of the week..I would like to suprise him when he gets home...so I don't want to call him for what to do...he would just say, I will do it when I get home...takes all the fun out of a suprise.
View attachment 67277371
View attachment 67277372
View attachment 67277373
View attachment 67277374
Not exactly sure what I am looking at in your first pic. If the wainscoting is a tongue and groove type, it will be very hard to, first strip plaster from it and second, to finish the wood and have it look right. Was the plaster applied directly over the wood, (I a hate covering wood with plaster, paint, etc.)
I recommend troweling some plaster back over, no telling what you uncover once you begin........
So, this whole quarantine thing has me a little on edge at home, bored to damn death is more like it...but there are numerous projects...I finished my yard, garden, so forth...and sat at the computer and looked at the crack in my plaster...and then bam cracked paint...so I go get the scraper...and here we are a few hours later...so ....how do I get it to the bare wood? Would you strip it to the raw wood and then sand and stain or should I just paint it again? I added the exterior so that you can get an idea of the style of the home. My home was built in 1890
The plaster is cracking because it is old as hell so yes, I made a hole in the wall around the crack in order to fix it....I don't want to replace with sheetrock, because it has a historical designation...so I have to do it the hard way and repair it with plaster again....then the color for my mantle.....(the mantle I did some time back...so no, I didn't strip it down in a few hours..just the one wall of the wainscoting. Any advise?? My husband is in Charleston for the rest of the week..I would like to suprise him when he gets home...so I don't want to call him for what to do...he would just say, I will do it when I get home...takes all the fun out of a suprise.
View attachment 67277371
View attachment 67277372
View attachment 67277373
View attachment 67277374
No, I am repairing the cracked plaster...the wood you see there is the wood used to adhere the plaster to. So that is actually just being repaired...what I am talking about is the wainscoting....the first pic of the exterior of the home is to give an idea of the style of the home...that can be hard to tell from a few select interior pics of a living room that is being peeled apart. It has lots of groves as you see...so, I don't know if I just scrape the loose stuff, sand and paint...or go full out and strip and then stain...yes, I know I won't be done by the weekend...but I would love to have a lot done.
What? There is no historic factor with keeping plaster lathe! Who the hell told you that? Tearing out that wainscoting is going to take the plaster with it so you might as well come into 2020.
New plaster jobs are basically mold resistant Sheetrock with a veneer finish anyways.
I use a 1/4" angle grinder with a 1/8" thin wheel and cut a straight edge using my laser light just above the wainscoting and rip out everything below the line when I'm done cutting. I then make furring strips to bring the plaster board out to meet the existing plaster if needed.
After looking again, I see your interior shots are at weird angles. They all need to be turned 90 degrees to the right, right?
oh, I don't want to rip out the wainscoting..I want to take it to the wood and either repaint it a nice color or stain it...not sure which...do you think I should rip out the wainscoting? Replace it with new? So just tear out all the plaster and re sheetrock?
In that case you can take 5 minute hot mud and fill the hole and wet sand it when it begins to set off. Just make sure your remove any loose pieces first.
I can't tell by the pictures if you have texture or a pattern in your plaster. If you do, they are easily copied with a little patience and technique.
I restore older homes for as a business.
oh, I don't want to rip out the wainscoting..I want to take it to the wood and either repaint it a nice color or stain it...not sure which...do you think I should rip out the wainscoting? Replace it with new? So just tear out all the plaster and re sheetrock?
Oh God, please keep the wainscoting. God I miss my house in Minneapolis that had mahogany all over the place.
I adore mahogany....it has to be one of the most beautiful woods I have ever encountered...then Walnut and cherry.
No, I am repairing the cracked plaster...the wood you see there is the wood used to adhere the plaster to. So that is actually just being repaired...what I am talking about is the wainscoting....the first pic of the exterior of the home is to give an idea of the style of the home...that can be hard to tell from a few select interior pics of a living room that is being peeled apart. It has lots of groves as you see...so, I don't know if I just scrape the loose stuff, sand and paint...or go full out and strip and then stain...yes, I know I won't be done by the weekend...but I would love to have a lot done.
I almost get weepy thinking about that place.
Mahogany slab paneling, wainscoting, recessed casement windows with stained glass, brass plumbing, crystal doorknobs, built in credenzas, beveled lead glass mirrors, old pushbutton light switches, stamped tin ceilings.
Sigh...:2grouphug
Not sure where you live, if you can open windows already. I'd be careful with anything that creates dust/fumes, simply because of the mask shortage. jfft
how old was the home? Since you are no longer there, do you have any pics you would like to share? It was my dream to own a historical home, the wood, the tall ceilings, large rooms and all that jazz...never dreamed at the time they could be so much work...I still love the reward though...I know each thing I do, makes the house more attractive, more valuable, etc.
It was on Aldrich Avenue near Lyndale in Minneapolis.
I used to have a ton of interior pictures but lost them to water damage in the 1994 Northridge Quake, along with a lot of other stuff.
It was on Aldrich Avenue near Lyndale in Minneapolis.
I used to have a ton of interior pictures but lost them to water damage in the 1994 Northridge Quake, along with a lot of other stuff.
I adore mahogany....it has to be one of the most beautiful woods I have ever encountered...then Walnut and cherry.
I almost get weepy thinking about that place.
Mahogany slab paneling, wainscoting, recessed casement windows with stained glass, brass plumbing, crystal doorknobs, built in credenzas, beveled lead glass mirrors, old pushbutton light switches, stamped tin ceilings.
This is my Saint Paul Home I recently sold.....1912 Victorian; My brother and I gutted the plaster, sheet rocked, and refinished the wood...…the before and after are pretty telling.
Minneapolis and Saint Paul have a treasure trove of old homes.
View attachment 67277391
View attachment 67277392
View attachment 67277393
beautiful job. Did you have to insulate the walls when you sheetrocked? Some of the reason we are sticking with the plaster is first the asthetics and it being old and also because we would need to insulate as well as remove all of the wood in place now. I love the varnish and the natural finish on the wood. I am personally going with mahogany throughout the house. I lived so many years in Honduras that I fell in love with that type of wood and have bought quite a few things that are mahogany.
We used blown foam insulation inside the outer walls of the house, but were limited on the indoor walls because most of the walls had recessed pocket doors inside them; we removed the plaster and placed up new sheetrock simply because the plaster was in bad shape anyway, and we had to remove it so we could run new Romex wiring in the house for the electrical.
The wood in the house is all original; a mix of Maple and Oak, and it badly needed to be refinished.
My Brothers wife is from Honduras, and they spend quite a bit of time there when they can....My time in Honduras was limited to short stays in at Soto Cano.
ah you were relegated to the military base and staring at the mountains. I don't recommend the inland part of Honduras right now...but if you want a beach you will find no where else...go to Roatan or Utila. What part of Honduras is she from? My husband is from San Pedro Sula. He said whenever we decide retirement is our thing we will go to the islands to live, but he wants to build a home identical to the one we have now.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?